Showing posts with label Viper. Show all posts
Showing posts with label Viper. Show all posts

Tuesday, January 22, 2019

Shaping the Darkness



Framing Shutters are an integral part of every lighting designer's toolkit.  They are found on both conventional and automated lights and serve important purposes.  Generally shutters are used to block out light from unwanted areas.  Through the use of four variable blades, the light output can be cropped to only certain areas or specific shapes.  Shutters are often used to eliminate lighting spill onto set pieces and other elements that need to remain dark.  Moving a shutter into a masking position is typically referred to as a "shutter cut."



Conventional Lighting
The most common use of shutters within conventional lighting can be found in ellipsoidal spotlights such as the Martin ELP Ellipsoidal fixtures.  As with most functions on conventional fixtures, the four shutter blades are manually moved into various positions.  In addition, the user can rotate the barrel to achieve different "off-axis" angles with the shutters.  Some ellipsoidals even feature locking mechanisms to ensure the shutter cuts remain once set.  By adjusting the lens focus or using frost gels, the edge of the shutter may be hard or soft.


 
Automated Lighting
Automated lights such as the Martin MAC Encore Performance and Martin MAC Viper Performance utilize a complex system of motors to provide remote movement of shutter blades.  In addition, the entire shuttering mechanism can rotate to provide a similar effect to rotating the barrel on an ellipsoidal.  As the pan and tilt of the fixture can change from cue to cue, so too can the framing shutter settings.  It is extremely important that the shutter system and its software allow for tremendously accurate positioning of the blades.


 
Shutter blades can also be found in some automated wash fixtures such as the Martin MAC Encore Wash and the Martin MAC Viper Wash DX.  The principle is the same, where the shutter blades will cut off light output from particular areas.  However, since the fixtures are wash functions and employ Fresnel or other soft lens abilities, the sharp cutoff is of the shutter will appear more subtle.


An additional function with automated framing shutters is the ability to create dynamic movement effects by continuously changing the framing shutter settings.  This can result is some very exciting looks from the fixture as the shape of the output light constantly morphs into new shapes.

Blocking the Light
Framing shutters have been an important tool for lighting designers for many years and will continue long into the future.  Eventually we will see digital shutters that allow for any shape (or mask) that one desires.  Until then, conventional and automated fixtures will continue to use metal blades to shape the output and eliminate light from unwanted areas.




Friday, November 11, 2016

Martin MAC Viper High CRI Lamp


The Martin MAC Viper line of automated luminaires are extremely popular due to their extensive feature set, great color mixing, small size and weight, quiet operation and more.  You will find them on concerts, television shows, Broadway and other theatre, corporate shows and more.  The MAC Viper range ships with an Osram Lok-It HTI1000W/PS lamp which is a wonderful source.

Osram has recently updated this lamp with some design improvements and suppliers are changing over to the newest revision.


The lamp can be ordered as Osram code 54385 or Martin P/N: 97010346.

Osram has recently developed a new lamp for the MAC Viper series that has also been approved by Martin.  The Osram Lok-It HTI1000W/PS Brilliant is an alternative for situations where quality of light is key to the performance.  This lamp delivers enhanced color rendition (CRI >95), resulting in better performance in critical applications such as theatre and TV productions.

The color temperature is the same as the original lamp, but there is no green peak in the spectrum; resulting in no further need to use the minus-green filter from the static color wheel.  The output appears more brilliant and the colors from the CMY mixing system even more vibrant than with the standard lamp. The only downside being a slightly lower output (-5%) compared to the standard lamp.

The lamp can be ordered as Osram code 53973 or Martin P/N: 97010351.


Martin has also approved an alternate lamp from Philips for the MAC Viper series.  The Philips MSR Gold 1000 MiniFastFit lamp has a slightly longer lifetime (900 hrs.) than the Osram lamp, but a little lower output (-10%) and a CRI around 80.

The lamp can be ordered as Philips code 928171405115 or Martin P/N: 97010350.



The following comparison chart utilizes data supplied by the lamp manufacturers and is a great way to understand the differences between the lamps:


All of the above lamps are now available from lamp retailers as well as direct from Martin.  Be sure to ask your rental company for the best lamp for your application.

Friday, June 24, 2016

The Amazing MAC Axiom Hybrid




Martin Professional has released the new MAC Axiom Hybrid which is an amazingly powerful fixture.  The unit has many features that enable lighting designers to achieve beam, spot, and wash functionality from a single, compact fixture.





The MAC Axiom Hybrid uses a 440w short-arc lamp to achieve a bright output throughout its entire zoom range.  The zoom is amazing as it is continuous from 2 degrees to 44 degrees.  There are no modes or additional lenses required to change from beam to spot.  In fact, the zoom from 2 to 44 is extremely fast and can be used with or without focus tracking.

The nine rotating gobos are all designed to be strong aerials or great projections.  Each is on its own easy-to-change carrier. As is common with rotating gobos, each can rotate at different speeds, index and shake.  The entire wheel can also spin in opposite directions and at differing speeds.




The fixed gobo wheel has many different abilities combined into the single wheel.  First there are a number of beam reducers that tighten the beam to a near pencil beam effect.  Next you will find twelve fixed patterns (again a good combo of aerial and projection).  Following that there is a frost filter and partial animation effect.  The latter is similar to the animation effect on the MAC Viper Profile.





The MAC Axiom Hybrid's two prisms with prism lineator effects provide superb image multiplication.  The prism lineator function allows movement of the prism within the optical path to alter amount of overlap in the prism facet projections.

An independent beam softener can be inserted into the optical path to reduce the hot-spot created by the short arc lamp.  This is especially useful for crisp gobo projections or flat-field illumination needs.




The MAC Axiom Hybrid also sports a great color system consisting of CMY flags that have been tuned to match the Viper series.  An independent variable CTO and a fixed color wheel with sixteen colors plus open add to the color abilities.




 
With a low weight, servo motors for movement speed and accuracy, and a compact size the Martin MAC Axiom Hybrid is quickly becoming a new industry standard.

Wednesday, February 24, 2016

Make Dimmer Curves Your New Friend

There is nothing like a perfectly smooth fade to blackout over ten seconds to evoke emotion at the end of a scene or song.  The dimming ability of any lighting product is determined by several factors including the light source type, dimming method, control signal and more.  Generally, designers prefer a smooth dimming ability that provides a seamless and even change in intensity whether increasing or decreasing in value.

All Martin Professional lighting products default to a smooth dimmer curve that is ideal for most situations.  However, there may be instances where you wish to match the dimming abilities of other products such as cyc lights or incandescent lamps, or you just prefer a different path.  All current Martin Professional products include the ability to select between four different dimming curves from either the menu system or DMX.  With DMX, you can actually change the dimming curve on a cue-by-cue basis!  Lets look at the various options:


Linear - provides an even distribution of light in correlation to the DMX level of the dimmer channel(s).  Although mathematically uniform, this dimmer curve is often not the most desired by lighting designers.


   
S-Curve - provides a finer control at lower and higher levels while being more coarse at medium levels.  This dimming curve best emulates a typical incandescent lamp's dimming abilities.  This is also the default and often considered the most natural dimming curve.
  

Square Law - provides a finer control at low levels and coarser at high levels.  Useful for low level scenes and chases as more DMX values are allocated for dimming at the bottom end.

 
  
Inverse Square Law - provides a finer control at high levels and coarser at low levels.  Useful when not dimming all the way out or when less low level control is desired (snap on/off).



Often it is best to ensure that your lighting console is properly crossfading the dimming channel(s) in a linear fashion. Otherwise there may be conflicts between how the console is fading and how the light is responding.  It is also important that all your fixtures are set to the desired dimming curve.  A good practice is to set all fixtures to the factory defaults when starting a new show.  Then make changes in the menu or via DMX as needed.  Otherwise you could end up with some fixtures dimming differently than others.  In addition, if you do change the dimmer curve for a particular cue, be sure to set it back to the default in the following cue!

Adjusting the dimmer curve is a very useful tool when applied to specific situations.  Martin Professional maintains the same four types of dimmer curves and control abilities across the entire range of Martin Professional products.  This ensures simplicity and consistency when using MAC Vipers, MAC Auras, MAC Quantums, or the Atomic 3000 LED.

Wednesday, January 20, 2016

Beams, Beams, Beams!

Tight, narrow beams of light are a staple of lighting design and Martin Professional has several products that create stunning beams of light.  These units are very impressive when used in large quantities and can wow audiences and professionals alike.



The Martin RUSH MH3 Beam and RUSH MH4 Beam fixtures are designed for maximum beam effects.  Each can produce extremely narrow rays of light that seem to go on endlessly.  The RUSH MH3 Beam boasts a zoom range of 1° to 3.8° while the RUSH MH4 Beam has a powerful fixed beam angle of 3°.


 
Both units include a color wheel, gobo wheel, rotating prism, and dimmer.  Even though they are based on low wattage lamps, the small aperture and narrow lensing allows for an extremely bright output.  In fact, the collimated beam is so intense that you MUST be careful where you point them as it is very easy to burn things.

For even brighter and more feature rich beams, consider the Martin MAC Viper Beam.  This fixture is comprised of the MAC Viper AirFX with a special lens attached to the front of it.  The micro-fresnel lens is easy to install and produces amazing pencil-thin beams of light.  In fact, the unit has a zoom range of 7.5°-31°.  When combined with all the built in features of the MAC Viper AirFX you get an amazing beam fixture that can create a multitude of looks.  In addition you can use the internal iris to narrow the output down to near zero degrees!  Don't worry if you cant get your hands on the MAC Viper Beam, the MAC Viper AirFX on its own can also create some stunning beam effects with its native lens too.

Powerful narrow beams have been all the rage on many stages in recent years and are here to stay.  It is important to understand how to design and program with this type of fixture and to be aware of the dangers too.  Martin Professional has a broad range of products to help you create various types of narrow beams on your stage.

Monday, December 7, 2015

Wash the Stage with Color and Style

The Martin MAC Viper Wash and MAC Viper WASH DX are extraordinarily wonderful discharge sourced wash lights.  They both are very similar in terms of specifications and pricing with the difference being that the DX model includes an internal barndoor system.  Because the price is so similar, most designers and rental companies choose the DX model.

Using the same 1000w lamp as all Viper models, the MAC Viper WASH DX has a solid output of over 33,000 lumens and a high CRI. The fixture has a native color temperature of 6500K while a variable CTO filter allows the user to adjust the color temperature down to 3200K.  The color system is the same ultra smooth CMY system found in all Vipers.

Many theatrical and television designers prefer the MAC Viper Wash DX to other wash lights (including LED models) because of the output, light quality, smooth color mixing, and small size.  In addition, it has received high marks for how quiet the unit is.  Many shows on Broadway are using the MAC Viper Wash DX as they have found it to be near silent.  The fixture is also popular on major auto shows, corporate events and more.

The internal barndoor system (framing shutters) help to turn the output from round to various shapes.  This is great for washing banners or any unique area requiring a strong cut off of output.  Plus both versions include an iris for further beam size control.

If you have not had a chance to use the MAC Viper Wash or MAC Viper Wash DX yet, you should get your hands on one soon. 


Thursday, September 17, 2015

MAC Viper Used as a Followspot



Quite often LD's find it handy to utilize a moving light in place of a truss spot.  This allows full DMX control of all the fixture's attributes while allowing an operator to manually position the unit.  Martin Professional patented a system for doing this with the Martin MAC III and some customers have asked about doing the same with the Martin MAC Viper Profile, MAC Viper Performance, and MAC Viper AirFX.




While a dedicated spotlight mode does not exist in the Viper range, there is an approved method for using the fixtures as followspots.  You simply have to place the fixture into Service Mode.  This will disable the pan/tilt motors and allow all the other functions to behave normally via DMX.

In order to do this, you simply need to press and hold both the Escape Button (C) and the Jog Wheel (B) when powering on the unit. 

Then the display will show a  "Service" warning.  At this point the power will be removed from the pan/tilt motors thus allowing you to move the head freely.

It is important to note that a power cycle will disable the Service Mode.  If you send the unit a Reset command from DMX, it will reset all the functions other than pan/tilt and remain in the Service Mode.


 
So now you know how to configure your Martin MAC Viper fixture for use as a followspot.  Have fun with this and be sure to wear gloves when manually moving the fixture head as some parts of it can be rather hot!


Thursday, August 6, 2015

MAC Viper Quadray is Really Cool!

Martin engineers created a really cool accessory that replaces the front lens of any MAC Viper AirFX called the Quadray.  This nifty tool has four lenses that can each alter their positon allowing for really exciting and dynamic aerial beam looks.

Yes, you will loose a small amount of light output as you are now directing the output through four small lenses instead of one large lens, but the return you get in looks is amazing.  You can project 1, 2, 3, or 4 individually controlled beams of light from a single fixture.  Plus you can change between these looks at any time via simple DMX controls!





The Quadray is excellent for upstage fixtures placed on the deck or hanging in the air.  For instance, if you had 12 MAC Viper AirFX on the upstage floor behind a band you could create an plethora of different looks when the Quadray units are attached.  Sometimes you could have 12 beams behind the band, while at other times it could multiply to 24, 36 or even 48!  This is really one way to make HUGE looks with any rig.





Each of the four individual lenses can be positioned independently or they can come together to create a "normal" output of one image from the fixture.  Gobos can be projected as one image or multiples as well.  Martin also includes built in effects that provide a multitude of pre-programmed movement effects for the Quadray unit. From static fan outs to complex movement chases, they have thought of the most common and unique looks you would want.


Installation is very easy and the fixture auto-senses the new lens.  You will need to enter some calibration information about the Quadray unit into the fixture's menu though.  Plus do not forget that you will need a different fixture library in your console than the standard MAC Viper AirFX library to control the Quadray.




While the Quadray may not be for everyone or every application, it certainly can add some unique movement and excitement to many productions, while increasing the output capabilities of each fixture.  Check out this video for a bit more information and to see some shots of Quadray in action:

https://youtu.be/efiu0dCItU8

Wednesday, June 10, 2015

Mac Viper Pan/Tilt Speed Settings

Did you know that you can assign the default movement abilities of the Mac Viper products by making a change in the menu system or via DMX?  There are three options: Normal, Fast, and Slow.

The Normal setting is the default and the one that most people will use as it works well for most shows with combinations of fast and slow moves.  However, there may be specific cues or sequences where you choose to change the pan/tilt speed.  The Slow setting is optimized for smooth movement and is best when performing slow movements at a long throw.  The Fast setting is optimized for speed and is handy when building fast chases and ballyhoos.

Using the control channel, you can change the pan/tilt speed setting as needed, just remember to restore it back after the required instance.  Otherwise you might find subsequent cues reacting differently.  Also note that the pan/tilt speed will revert back to the Normal speed setting after a power cycle (when changed via DMX).  To lock the pan/tilt speed to a particular setting, make the change directly in the Speed section of the fixture menu instead of via DMX.

 It is also a good idea to confirm that all your fixtures are set to the same pan/tilt speed setting before starting a programming session.  Otherwise you might find some fixtures moving differently from others!


To make pan/tilt speed changes via DMX use the following values on the control channel.  Note that the value needs to be held for 1 second for the change to take affect.

DMX 80-84 - Normal pan/tilt speed
DMX 85-89 - Fast pan/tilt speed
DMX 90-94 - Slow pan/tilt speed

Have fun with the settings and experiment with how you can optimize your Vipers for whatever movement task you give them!

Thursday, May 21, 2015

Menu Shortcuts

Did you know that many of the Martin Professional products have a great shortcut menu that allows you to quickly access common menu functions?  Depending on the model, all you have to do is hold a specific button sequence and then the Shortcut Menu will be displayed.  The menu will include items such as Reset All, Lamp On/Off, and Rotate Display.

With Viper products, hold the Escape (C) button for 2-3 seconds, then choose the shortcut with the jog wheel (B).


With Quantum products, hold the Menu button (A) for 2-3 seconds then use the arrow keys (B) and Enter (C) to select the shortcut.

With the Aura or Aura XB there is not a shortcut menu, but there is a shortcut for Reset ALL:
Hold the Menu/Escape button and press Up.