MAC Axiom Hybrid Color Mix Options

The MAC Axiom Hybrid is a full featured luminaire that features beam, spot, and wash functionality.  I wrote all about it here.  As with most automated lights there are many different functions that programmers and designers need to be aware of.  One of the important options of the MAC Axiom Hybrid is the ability to toggle the color mix system between two different modes via DMX settings in the control channel.  The MAC Axiom Hybrid uses dichroic color flags to mix the Cyan, Magenta, Yellow, and CTO colors.  Each color adjusts from low saturation to full saturation.

When in Snap mode, each color will snap to its lowest level of saturation that fills the aperture of the light.  This occurs at 1% for each color.  You can then adjust the saturation amount of the color from 1% to 100% as you adjust the associated DMX value.  When the DMX value for the channel is at zero, all the color will be removed from the aperture.  By default the MAC Axiom Hybrid color mix system operates in Snap mode.

Fade mode will change the behavior of the color mix system to allow for partial colors at low saturation.  When adjusting the color channel between 1% and 30% a partial covering of the aperture is visible.  At 30% and above, the color will completely fill the aperture starting with the least saturation and increasing to the most saturation as the channel increases to 100%.  The split colors that are possible with Fade mode allow for some unique and creative color combinations becasuse each of the color flags (CMY) are offset from each other.

Toggling between the two color modes is very easy by just adjusting the control channel to a specified level.  The control channel of the MAC Axiom Hybrid is Channel 23 of the light and the following values will assign the color mode:

DMX 34: CMY Snap Mode

DMX 35: CMY Fade Mode

Of course your console library may label these settings differently or exclude them all together.  Be sure to check your library to ensure you can access this option.

The following video shows the difference when using Snap versus Fade mode with a simple crossfade on Cyan.  The same sine wave effect is running on cyan from 0-100% at a medium speed for both modes.  You can clearly see the difference when the color mode is changed from Snap to Fade.

Designers and programmers may find that Snap mode works best for most situations, however effects that continually change color or certain slow color transitions tend to look better when in Fade mode.  With a good understanding of the usage of the color modes, any designer or programmer can get the most out of the color system in the MAC Axiom Hybrid.

The Amazing MAC Axiom Hybrid

Martin Professional has released the new MAC Axiom Hybrid which is an amazingly powerful fixture.  The unit has many features that enable lighting designers to achieve beam, spot, and wash functionality from a single, compact fixture.





The MAC Axiom Hybrid uses a 440w short-arc lamp to achieve a bright output throughout its entire zoom range.  The zoom is amazing as it is continuous from 2 degrees to 44 degrees.  There are no modes or additional lenses required to change from beam to spot.  In fact, the zoom from 2 to 44 is extremely fast and can be used with or without focus tracking.

The nine rotating gobos are all designed to be strong aerials or great projections.  Each is on its own easy-to-change carrier. As is common with rotating gobos, each can rotate at different speeds, index and shake.  The entire wheel can also spin in opposite directions and at differing speeds.

The fixed gobo wheel has many different abilities combined into the single wheel.  First there are a number of beam reducers that tighten the beam to a near pencil beam effect.  Next you will find twelve fixed patterns (again a good combo of aerial and projection).  Following that there is a frost filter and partial animation effect.  The latter is similar to the animation effect on the MAC Viper Profile.





The MAC Axiom Hybrid's two prisms with prism lineator effects provide superb image multiplication.  The prism lineator function allows movement of the prism within the optical path to alter amount of overlap in the prism facet projections.

An independent beam softener can be inserted into the optical path to reduce the hot-spot created by the short arc lamp.  This is especially useful for crisp gobo projections or flat-field illumination needs.

The MAC Axiom Hybrid also sports a great color system consisting of CMY flags that have been tuned to match the Viper series.  An independent variable CTO and a fixed color wheel with sixteen colors plus open add to the color abilities.




 
With a low weight, servo motors for movement speed and accuracy, and a compact size the Martin MAC Axiom Hybrid is quickly becoming a new industry standard.