M-Touch Control

The newest console device for the Martin M-Series line of control consoles is now available, and it is really cool!  The M-Touch is a unique control surface that can be used for both playback and programming when combined with M-PC software or any M-Series console.

The surface of the low-cost controller has new-to-lighting technology utilizing Force Sensitive Resistors (FSR) on both flash keys and faders.  This allows surprising control possibilities based upon velocity and pressure.  In addition there are other touch sensitive keys and even a 5-pin XLR for DMX output.  You really should get your hands on an M-Touch as it is quite a powerful tool when combined with M-Series software.

One of the great features is that the M-Touch can be used with M-PC or used as a wing to any M-Series console.  In fact, you can even connect multiple M-Touch devices into any single system.



In order to do so, you will need to do a bit of configuration.  In the M-Series Menu, click on System then DMX Settings.

Now at the bottom of the screen select the USB2DMX tab and now you will see the M-Touch device (assuming you plugged it into your console/PC) on the top left of the screen.

On the right side of the screen are some options and here you can set the DMX universe to output from the 5-pin XLR (universe 1-4).  You can also set the Wing ID.  If the ID is set to 0 (the default) then it will mimic the first 10 faders on your desk.  If you set it to a higher number, then it will behave as a separate wing from the faders on your desk.  You can now change banks on the M-Touch and console separately!

The M-Touch is an amazing control option and very reasonably priced too.  Check out the videos below for more information and stay tuned for another blog post with some advanced functions of the M-Touch.