The RUSH line of products from Martin includes an exciting fog/haze product called the RUSH Club Smoke Dual.
The system can utilize fog and/or haze heads with the same fluid, thus the word "dual" in the product's name. It is actually a fog/hazing system that allows users to remotely locate the fluid reservoir and connect up to six fog and/or haze heads.
That's right, you can keep the pump unit (fluid reservoir) on the ground or at the DJ booth and have the heads located anyplace in the rig. The pump unit has a 10 liter reservoir which is sure last quite along
time in most environments. Plus since it can be mounted on the ground,
refilling is extremely simple. In addition because the reservoir is remote, you can aim the heads in any direction including straight up or down!
The fog and/or haze heads connect to the pump unit via a small hose for the fluid and you can have up to three distinct zones of control. Each zone can be controlled individually as the heads are also connected to the pump unit and to each other via standard RJ45 Ethernet cables. In fact, you can even daisy chain the units that are on the same zone. Configuration is simple as there are no network settings to worry about.
The entire RUSH Club Smoke Dual system is very versatile and extremely useful in permanent installations. Imagine having the fluid located in one easy-to-replace location while having six different heads throughout the venue. I love that one zone could be hazers, while another could be fog in the rig, and a third could be floor fog effects.
Control is very simple via DMX, direct controls on the pump unit, or a special wired remote. With DMX you can easily trigger each of the three zones plus a fourth channel provides access to control functions. The fog and haze heads have also been designed with forethought as the status LED's for Heat and Ready are on the side of the unit instead of the back. This makes it easy to spot the status from the ground and ensure the heads are ready.
The RUSH Club Smoke Dual has been designed with longevity in mind and is a perfect choice for any installation. With a very affordable price, there is no reason not to invest in the RUSH Club Smoke Dual and open up your designs to new possibilities.
Tuesday, November 24, 2015
Friday, November 6, 2015
The OTHER New LED Strobe from Martin
The Martin Atomic 3000 LED strobe is not the only new LED based strobe announced by Martin. The RUSH line also now includes a LED strobe called the RUSH Strobe CWL.
The RUSH Strobe CWL is a white LED strobe consisting of 99 Cree 3W LED's in a linear configuration. With the integrated reflector the unit produces over 17,000 lumens of bright white output. The beam angle is fixed at 87 degrees which is great for a wide strobe effect. Plus the high color temperature near 7500K looks stunning.
The RUSH Strobe CWL can be operated via DMX using 1 or 4 channels (with the 4 channel mode matching the industry standard Atomic 3000 DMX layout). The unit also includes stand-alone and sound activation modes. The fixture has Powecon In and Thru connectors so it is ease to connect many to the same circuit. An LCD display allows for quick configuration and setup.
In addition, there is an accessory that allows you to stack four units together and hang from a single bracket. This really opens up some cool programming possibilities with a bank of Strobe CWL's.
Expect to see the RUSH Strobe CWL used on stages, clubs, and in a variety of other situations where a high-output, low-cost LED strobe is desired.
The RUSH Strobe CWL is a white LED strobe consisting of 99 Cree 3W LED's in a linear configuration. With the integrated reflector the unit produces over 17,000 lumens of bright white output. The beam angle is fixed at 87 degrees which is great for a wide strobe effect. Plus the high color temperature near 7500K looks stunning.
The RUSH Strobe CWL can be operated via DMX using 1 or 4 channels (with the 4 channel mode matching the industry standard Atomic 3000 DMX layout). The unit also includes stand-alone and sound activation modes. The fixture has Powecon In and Thru connectors so it is ease to connect many to the same circuit. An LCD display allows for quick configuration and setup.
In addition, there is an accessory that allows you to stack four units together and hang from a single bracket. This really opens up some cool programming possibilities with a bank of Strobe CWL's.
Expect to see the RUSH Strobe CWL used on stages, clubs, and in a variety of other situations where a high-output, low-cost LED strobe is desired.
Subscribe to:
Posts (Atom)